The CMMG Mk4 DTR2 was one of the first factory rifles built around the .224 Valkyrie, and it is still the most literal answer to what Federal designed the cartridge to do: push a 90-grain match bullet past 1,000 yards from an AR-15 action. It carries a 24-inch medium-taper stainless barrel, a Geissele SSA two-stage trigger, a Magpul PRS stock and a 14-inch M-LOK handguard. It weighs 9.2 lbs unloaded, which is heavy for an AR and exactly right for a bench or a bipod. Here is what the specs say, what a 24-inch Valkyrie can realistically do, and who should skip it.
| Spec | CMMG Mk4 DTR2 (part 25AB216) |
|---|---|
| Caliber | .224 Valkyrie |
| Barrel | 24″ medium taper, 416 stainless, 1:7 twist |
| Gas system | Rifle length |
| Muzzle device | CMMG SV brake, ½-28 threads |
| Trigger | Geissele SSA two-stage |
| Handguard | CMMG RML14 (14″ M-LOK) |
| Stock / grip | Magpul PRS / Magpul MOE |
| Receivers | Forged 7075-T6 upper, 7075-T6 lower |
| Magazine | 10-round 6.8 SPC style (one included) |
| Weight / length | 9.2 lbs unloaded / 44.5″ |
| Launch MSRP | $1,699.95 (2018) |
| Listed price, Nov 2026 | $1,457.99 at one major online dealer (verify stock) |
Quick Verdict
✓ Best for: bench shooters and long-range plinkers who want a ready-to-shoot Valkyrie with a real match trigger
✓ Key strength: the longest factory barrel in the class, so the most velocity and the most supersonic distance
✗ Not ideal for: hunters who carry the rifle, or anyone who wants a light, handy ARA heavy, purpose-built 24-inch Valkyrie with trigger and stock upgrades most shooters would otherwise add themselves. At roughly $1,450 to $1,700 it is fair value if you shoot past 600 yards, and poor value if you do not.
Where the Mk4 DTR2 Fits
The .224 Valkyrie is a .22-caliber cartridge in a 6.8 SPC-sized case, so it runs in a standard AR-15 with a Valkyrie-specific barrel and bolt, and it feeds from 6.8 SPC magazines. The idea was simple: take the very high ballistic coefficient of a 90-grain .224 bullet and keep it supersonic far beyond what a .223 Remington can manage. A .223 loaded with a 77-grain bullet is a fine 600-yard cartridge. The Valkyrie is aimed at what happens after that.
The DTR2 is CMMG’s long-range expression of that idea. Where most Valkyrie rifles use 18 to 20 inch barrels, CMMG went to 24 inches and added the furniture a precision shooter wants. If your interest is long-range shooting out to 1,000 yards, the DTR2 is built for it. If you want a .22-250-style flat shooter in a semi-auto, it is also a reasonable fit, though a bolt gun will always be lighter for the same velocity.
Ballistics: How Far Does It Stay Supersonic?
Federal’s published figure for its 90-grain Sierra MatchKing load is 2,700 fps from a 24-inch test barrel, with a G1 ballistic coefficient of .563 (G7 .274). That is the number a 24-inch DTR2 is chasing. I could not find an independent chronograph test of this exact rifle, so treat 2,700 fps as the factory benchmark rather than a guarantee. Measured data from other Valkyrie rifles gives context: GunsAmerica recorded about 2,533 fps from an 18-inch barrel, 2,628 from 20 inches and 2,680 from 22 inches, and Wilson Combat reports 2,715 fps from a 20-inch gun. A 24-inch barrel reaching 2,700 is plausible, but lot-to-lot variation of 50 to 100 fps is normal.
Using a ballistic solver validated against Federal’s own table (it reproduces roughly 1,950 fps at 500 yards for the 2,700 fps load), the 90-grain SMK behaves like this at sea level in standard conditions:
| Muzzle velocity | Velocity at 1,000 yd | Velocity at 1,300 yd | Goes subsonic at (approx.) |
|---|---|---|---|
| 2,628 fps (20″ class) | 1,315 fps | 1,094 fps | 1,265 yd |
| 2,680 fps (22″ class) | 1,346 fps | 1,112 fps | 1,295 yd |
| 2,700 fps (Federal, 24″) | 1,357 fps | 1,120 fps | 1,305 yd |
| 2,715 fps (best 20″ report) | 1,366 fps | 1,125 fps | 1,315 yd |
The speed of sound at sea level on a standard day is about 1,116 fps, so a bullet at 1,120 fps at 1,300 yards is only just supersonic, and one that arrives at 985 fps is already well below it. Atmosphere moves the line. At 5,000 feet of elevation, thinner air pushes the 2,700 fps transition out to roughly 1,550 yards. On a 95°F day at sea level it is about 1,355 yards, and at 20°F it drops to around 1,270 yards. In practice the DTR2 gives you a bullet that stays supersonic through 1,000 yards in every normal condition, and out to roughly 1,300 yards in standard air if it matches the factory number. The usual “past 1,300 yards” claim only holds at the top of that range.
Build and Features
The barrel is a 416 stainless medium-taper profile, a sensible compromise between a pencil barrel and a heavy contour. With a rifle-length gas system and a gas port sized for the Valkyrie, the DTR2 is designed to run reliably with 90-grain match ammunition rather than light plinking loads. The upper is forged 7075-T6, and CMMG says the bolt is beefed up for the larger case. The rifle ships with an ambidextrous selector and an ambidextrous charging handle.
The Geissele SSA is the quiet headline. It is a proper two-stage match trigger that typically retails for several hundred dollars on its own, which is why the DTR2’s price looks better once you count what you would otherwise buy. The Magpul PRS stock is adjustable for comb height (about 0.8 inch of travel) and length of pull (about 1.4 inches), and the 14-inch RML14 M-LOK handguard has plenty of room for a bipod, a sling mount or an inline suppressor setup via the ½-28 threads once you swap the SV brake.
Real-World Use
On the range the DTR2 is a gentle rifle. Recoil from a 90-grain bullet at 2,700 fps in a 9-pound gun with a brake is closer to a rimfire than a deer rifle, so spotting your own hits at 800 yards is easy. That makes it an excellent trainer for a new long-range shooter who has outgrown a beginner rifle but is not ready for a magnum.
For field use it is more limited. A .224 Valkyrie is a small-bore round, and match bullets like the SMK are built to be accurate, not to expand reliably. It works on varmints and coyotes, and with a proper hunting bullet it can handle small to medium hogs, but it is not a deer rifle in the way larger AR-15 deer calibers are, and many states set minimum caliber or energy rules for deer. Check your regulations before you hunt anything big with it. Carrying 9.2 lbs plus optic through timber all day is also not fun.
Twist Rate and Ammunition
CMMG lists a 1:7 twist, and a 1:7 barrel stabilizes 90-grain bullets. That said, reviewers at Pew Pew Tactical noted that early 1:7 Valkyrie barrels showed inconsistent accuracy and that 1:6.5 barrels from Palmetto State Armory shot better with heavy bullets. One retailer listing for the DTR2 shows 1:9, which contradicts CMMG’s own launch spec, so confirm the twist on the rifle you actually buy. With 1:7, start with Federal 90-grain Gold Medal Match, Hornady’s 88-grain ELD Match, and the 75-grain loads for cheaper practice, and let your own groups decide.
Upgrade Path
The best thing about the DTR2 is that it needs very little. Add a quality optic in the 4-16x or 5-25x class, a bipod, and a rear bag. If you want to go further, a muzzle brake or suppressor is the one change that matters. Compared with building something similar yourself, as in our best AR-15 builds breakdown, the DTR2 saves you from sourcing a Valkyrie bolt, barrel and compatible magazines. CMMG also sells the upper group separately for existing lowers, at $899.95 at launch.
Pros and Cons
✓ 24-inch barrel gives the most velocity of any factory Valkyrie
✓ Geissele SSA trigger and Magpul PRS stock included
✓ Long free-float M-LOK handguard
✓ Soft recoil, easy to spot your own hits
✓ Price has come down from launch MSRP
✗ 9.2 lbs unloaded before optic and bipod
✗ 44.5-inch overall length, awkward for vehicles and blinds
✗ 10-round magazine only; 6.8-style magazines cost more than STANAG mags
✗ Barrel twist data is inconsistent between retailers
✗ Limited as a hunting rifle for deer-size game
How It Compares
| Rifle | Barrel / twist | Weight | Price (verify) |
|---|---|---|---|
| CMMG Mk4 DTR2 | 24″ / 1:7 | 9.2 lbs | $1,457.99 listed Nov 2026 |
| Seekins VKR20 (launch config) | 20″ / 1:7 | 8.8 lbs | $1,995 launch MSRP |
| Stag 15 Valkyrie | 18″ / 1:7 | 8.1 lbs | $1,179.99 to $1,282.99 listings, often sold out |
| PSA 20″ upper build | 20″ / 1:6.5 | 4.5 lbs (upper only) | about $780 with lower and scope bundle |
If you want a lighter rifle, compare the DTR2 with the 18-inch Stag or a 20-inch PSA build. If weight is not a concern and you want the most velocity, the DTR2 wins. If you do not need the Valkyrie at all, consider the smaller-bore options in our .22 ARC AR-15 build guide, or look at 6.5 Grendel and 6mm ARC for heavier bullets with stronger downrange energy. CMMG also makes the Resolute Mk4 in .22 ARC, a more compact take on the same platform.
Who Should Buy It
Buy it if you shoot steel and paper at 600 to 1,000 yards, want a semi-auto that does not kick, and prefer a rifle that arrives with a good trigger. Look elsewhere if you hunt in the mountains, want a lightweight truck gun, or are weighing AR-15 versus AR-10 platforms for bigger game. And if the .224 Valkyrie itself is not set in stone for you, see how it fits the broader picture in our .22 ARC vs 6.5 Grendel comparison, since both chase the same long-range goal with different bullets.
Frequently Asked Questions
How much does the CMMG Mk4 DTR2 .224 Valkyrie cost?
CMMG launched it at an MSRP of $1,699.95 in 2018. In November 2026 one major online dealer listed it at $1,457.99, though stock status was not shown. Prices and availability change, so confirm with your dealer.
How far is the DTR2 supersonic?
Federal’s 90-grain SMK load is rated at 2,700 fps from a 24-inch barrel. At sea level in standard air, that bullet drops below about 1,116 fps at roughly 1,305 yards. At 5,000 feet it stays supersonic to about 1,550 yards, and in cold air it goes subsonic sooner.
What twist rate does the Mk4 DTR2 use?
CMMG’s launch specification lists a 1:7 twist. One retailer listing shows 1:9, which appears to be an error, so verify the twist on the specific rifle you buy.
What magazines does the DTR2 use?
It uses 6.8 SPC style magazines and ships with one 10-round magazine. Standard 5.56 AR-15 magazines will not feed .224 Valkyrie reliably.
Can I hunt deer with the CMMG Mk4 DTR2?
It is not a typical deer rifle. The .224 Valkyrie is a small-bore cartridge and many states have minimum caliber or energy rules for deer. It is better suited to varmints, coyotes and range work, so check local regulations first.
Is the DTR2 too heavy for hunting?
At 9.2 lbs unloaded and 44.5 inches long, it is a bench and bipod rifle. Add an optic and bipod and it will be well over 11 lbs, which is a lot to carry on a long hunt.
Final Verdict
The CMMG Mk4 DTR2 does one thing and does it well: it turns the .224 Valkyrie into a mellow, accurate 1,000-yard AR with the barrel length the cartridge wants and a trigger that does not need replacing. It is heavy and long, it is not a deer rifle, and its twist-rate data deserves a double-check before you buy. For a dedicated range rifle at about $1,450 to $1,700, it earns its place.
Compare Before You Buy
Weigh the DTR2 against the lighter .224 Valkyrie rifles in this series, and read our .300 Blackout guide if suppressed use matters more to you than reach.
Prices and specifications were checked in November 2026 against manufacturer launch material and major retailers. They change often, so verify with your dealer before you buy.

